Treatment of Minorities in Turkey Essay -- Equality Justice Essays

Treatment of Minorities in Turkey Problems with format Turkey, a relatively new nation, is not new to internal conflict and the oppression of minorities. Wedged between Europe and the Middle East, the area occupied by Turkey has long served as a crossroads between these areas, and, as a result, Turkey's majority Islamic Arab populace is smattered with significant pockets of minorities. These religious and ethnic minorities have been the source of much controversy in Turkey, but now change appears to be on the horizon. As Turkey seeks the approval of the European Union, it has begun to implement impressive humanitarian reforms that should drastically improve the plight of the minorities that call the nation home. Undoing a Bitter History of Hate Turkey has been under the control of a self-pronounced secular administration for decades, and, ironically, progressive reform has only now become a reality as the Islamic Justice and Development Party (AKP) has assumed control of the government.[i] Thus far, the military establishment and existing political bureaucracy have been resistant to the AKP?s efforts to fully incorporate minority groups into mainstream society. Pointing to previous minority insurrections, military leaders are fearful that the new provisions will only serve to weaken the government's authority over the minority groups and to promote another wave of minority uprisings.[ii]? But, the possibility of membership to the European Union (EU) in 2004? has provided the AKP with adequate incentive to move forward with the reforms. EU membership does not currently include any majority Muslim nations. If Turkey were to be admitted next year, it would be first of its kind to do so. Therefore, Turkish officials hav... ...to Istanbul after synagogue blast,? The Independent (London), sec. News, November 17, 2003, LexisNexis Academic, December 12, 2003, p.4. [xviii] ibid, p.4. [xix] ibid, p.4. [xx] ibid, p.4. [xxi] Fiachra Gibbons, ?Comment & Analysis: The attack on Istanbul Jews is an attack on hope itself: The synagogue bombing threatens 1,300 years of tolerance,? The Guardian, November 17, 2003, LexisNexis Academic, December 19, 2003, p.20. [xxii] Geir Moulson, ?Erdogan challenges EU to admit Turkey, drop ?Christian club? image,? Associated Press Worldstream, sec. International News, September 3, 2003, LexisNexis Academic, December 19, 2003. [xxiii] ?At Last, Turkish Kurds,? p.14. [xxiv] ?Turkey still represses Kurds, despite EU-oriented reforms: rights group,? Agence France Presse, sec. International News, July 30, 2003, LexisNexis Academic, December 12, 2003.

E. M. Flemings Model of Artifact Study and the Work Boot :: Sociology Society Culture

E. M. Fleming's "Model of Artifact Study" and the Work Boot The work boot has become a hot item for many girls and young women. This artifact of appearance may reveal a lot about American culture and society in the 1990's. By applying E. M. Fleming's "Model of Artifact Study", I will analyze this artifact in an attempt to shed some light on the values, priorities, and ideals of our society. Just like Fleming's model suggests, this paper will be broken down into four major sections: Identification, Evaluation, Cultural Analysis, and Interpretation. Identification The Eastland work boot that I am referring to in this paper is shown below. It was manufactured in Freeport, Maine. Click on the picture for a catalog description from JCPenney. This is a wheat-colored, waterproof, plain-toe (as opposed to steel-toe) boot made for women. The soft Nubuck leather feels almost velvety. It has a thick rubber sole which looks like a gum eraser with a complicated traction pattern. The boot seems to be put together mainly by stitching and in most places, only one row of stitching is used. The only area that looks as if it may have the additional help of glue, is where the sole meets the leather-upper. It is clearly stitched here as well, but the stitches are coated with glue (possibly to help keep these stitches dry). The shoe-strings, which look like yellow and brown cords, are laced through a total of twelve holes (called "eyes") on each boot. There are six "eyes" lined up vertically on each side of the tongue. In this way, the shoe-strings can be laced in the traditional criss-cross pattern forming five "X's", one above the next, up the front of the boot. These "X's" are located in front of the tongue. The ends of each shoe-string are tied in a bow which lies flush against the highest "X". At the top of the boot, there is padding built into the collar that wraps around the back of the calf, just above the Achilles' tendon. This area doesn't seem to be made entirely of leather. Instead, it seems as if this cushion is made from a very thin, darker brown, soft leather lining stuffed with foam. Overall, the boot is very light-weight, weighing only 2.8 lbs. Evaluation It is interesting to compare this boot, worn for fashion, to the ones worn by construction workers, for durability and foot protection. These real work boots, designed for men, are shown in the picture to the right.

Custom Power Devices and the Benefits of their Application

CUSTOM POWER DEVICES Initially for the betterment of power quality FACTS devices such as STATCOM ( inactive synchronal compensator ) , SSSC ( inactive synchronal series compensator ) , IPFC ( interline power flow accountant ) , and UPFC ( incorporate power flow accountant ) etc are introduced. These FACTS devices are planned for the transmittal system. However today more concentration is on the distribution system for the betterment of power quality, these devices are customized and known as usage power devices. In 1995 N.G. Hingorani introduced the thought of custom power as an enlargement of FACTS impression to distribution system. The chief aim is to better power quality and enhance dependability of power supply. The construct of FACTS was besides proposed by Hingorani in 1988. The word `custom power ‘ illustrates the value added power that electric public-service corporations will offer their clients. The value add-on will supply the benefits of high power electronic accountants to distribution systems, on the supply terminal of industrial, commercial clients and industrial Parkss. The footings of usage power devices ( CPD ) are complementary to the entity terminal usage equipment at low electromotive forces ( such as UPS ( Uninterruptible Power Supply or standby generators ) . Need OF CUSTOM POWER DEVICES At present power quality is considered as one of the major concern. Distribution system is placed at the terminal of the power system and it is straight connected to the client, so dependability the power system chiefly depends on the distribution system. It has become important, chiefly with the debut of complicated devices, whose concert is highly sensitive to the quality of power supply. Power quality job is an incident manifested as an irregular electromotive force, current or frequence that effect in the failure of terminal usage setup. Any failure in the electrical distribution system will impact about 90 % of the mean client break. Since the customer’s demand for the dependability of power supply is lifting twenty-four hours by twenty-four hours, hence dependability of the distribution system has to be increased. Ideally, power distribution system should supply their client with a uninterrupted flow of energy at even sinusoidal electromotive force at the contracted magn itude degree and frequence. But, in pattern, peculiarly in the distribution system, incorporate several nonlinear tonss, which well affect the quality of power supplies. Due to the consequence of nonlinear tonss, the pureness of the supply wave form is lost. This may take to several power quality jobs. Although power perturbations will originate on all electrical system, the sensitiveness of today’s complicated electronic devices will do them more inclined to the quality of power supplies. To work out this job, Custom power devices are used. One of those devices is Distribution Static Synchronous compensator ( DSTATCOM ) , which is the most efficient and effectual modern usage power device used in power distribution webs. Categorization OF CUSTOM POWER DEVICES Custom power devices are classified based on their power electronic accountants, which can be either of the web reconfiguration type or of the compensating type. The web reconfiguration devices besides called switchgear include the solid province and or inactive versions or current modification, current breakage and current transferring constituents. The counterbalancing type usage power devices either counterbalance a burden ( e.g. rectify its power factor, instability ) or better the quality of the supply electromotive force ( e.g. extinguish its harmonics ) . Custom power devices are classified as fallows Network reconfiguration type of usage power devices includeSSTS ( Solid province transportation switch )SSCL ( Solid province current clipper ) and,SSB ( Solid province ledgeman )Compensation type of usage power devices includeDVR ( Dynamic Voltage Restorer )DSTATCOM ( Distribution Static Synchronous compensator )UPQC ( Unified Power Quality Conditioner ) .Distribution STATCOM ( DSTATCOM ) The distribution STATCOM is indistinguishable to a transmittal STATCOM which uses a VSC of the needed evaluation inside it. Though, the VSC employed in a DSTATCOM is a Type 1 convertor with PWM control above the magnitude of the injected AC electromotive force to prolong a changeless DC electromotive force across the capacitance. Rapid power semiconducting material devices like IGBT or IGCT are employed alternatively of GTO. The fast shift capableness given by IGBT ( or IGCT ) switches allow the usage of more complicated control methods to supply maps of active filtering ( by shooting harmonic currents ) , equilibrating ( by shooting negative sequence current ) and flicker relief. A DSTATCOM can be considered as a variable current beginning resolute by the control maps. To heighten the dynamic evaluation within the capacitive scope, a fixed capacitor/filter is connected in analogue with DSTATCOM. By affecting an energy storage device like SMES ( Superconducting Magnetic Energy Storag e ) on the DC side during a DC/DC power conditioner, it is possible to interchange existent power with the system for a limited clip ( during fleeting breaks or big electromotive force droop ) . Dynamic electromotive force refinisher / regulator ( DVR ) The Dynamic Voltage Restorer ( DVR ) is a series connected device indistinguishable to a SSSC. The chief purpose of a DVR is to take electromotive force droops perceived by sensitive tonss such as semiconducting material fabrication works or IT industry. Therefore the DVR that are installed till now have modular with evaluations of 2 MVA for each faculty. It has been designed to equilibrate the three stage electromotive force sags about 35 % if the continuance clip is less than half a 2nd. Typically the storage of energy in capacitance will lie between 0.2 to 0.4 MJ per MW of burden supplied. A DVR is connected in series along with the feeder by agencies of a transformer. The low electromotive force twist is associated to the convertor. The chief intent of a DVR is to command the electromotive force at the burden coach ; it will be in standby manner for the bulk of the clip through which the convertor is bypassed. The DVR injects a series electromotive force of the necessary magnitud e merely when droop is identified. It is indispensable to protect a DVR from the mistake currents ( as in the instance of a SSSC ) . A DVR with IGBT/IGCT devices will be able to pull off to move as a series active filter so as to divide the burden from electromotive force harmonics on the beginning side. It is besides executable to command the electromotive force on the load side with the injection of negative and/or zero sequence electromotive forces in add-on to harmonic electromotive forces. UNIFIED POWER QUALITY CONDITIONER ( UPQC ) Unified power quality conditioners are feasible compensation devices and are used to verify that the power delivered will fulfill all necessary criterions and specifications at the installing point. The ideal UPQC can be identified as the combination of a electromotive force beginning convertor ( shooting shunt current ) and a common DC nexus ( connected to a DC capacitance ) .UPQC consist of combined series active power filter that regulate electromotive force harmonics of the power supply, and shunt active power filter that regulate harmonic currents of a nonlinear burden. Due to double functionality, UPQC is considered as one of the most appropriate devices that can work out the jobs of both consumers every bit good as of public-service corporation. Hence UPQC will assist to heighten electromotive force profile of power distribution system. Benefits WITH THE APPLICATION OF CUSTOM POWER DEVICES The usage power devices like DVR, DSTATCOM and UPQC etc, are employed to heighten the dependability of the distribution system by giving electromotive force support at the critical coachs in the system ( with series connected accountants ) and to command the power flow in the critical lines ( with shunt connected accountants ) . Both power flow and electromotive force are regulated by the combined series and shunt accountants known as UPQC. As the power electronic control is comparatively fast, this allows ordinance under both steady province and dynamic conditions as compared to other accountants when the system is caused to perturbations. The benefits due to custom power devices are listed below.They assist to outdo possible system operation by diminishing power losingss and heightening electromotive force profile.The power flow in critical lines can be improved as the operating borders can be decreased due to fast controllability.The power transporting ability of lines can be raised to values up to the thermic bounds ( imposed by current transporting ability of the music directors ) .The transeunt stableness bound is improved hence bettering dynamic security of the system and diminishing the incidence of blackouts affected by cascading outages.The steady province or little signal stableness country can be improved by supplying subsidiary stabilising accountants to muffle low frequence oscillations.FACTS accountants s uch as TCSC can react to the job of Sub synchronal Resonance ( SSR ) experienced by agencies of fixed series capacitances connected in lines to take power from thermic power Stationss ( with turbo generators ) .The job of electromotive force fluctuation and moral force over electromotive forces can be overcome by these accountants.

Starry Night by Vincent Van Gogh

Nicole Brittingham March 11, 2013 ART 101-04 Analysis assignment * Starry Night by Vincent Van Gogh * This painting was made in 1889 during the postimpressionism era. * Starry Night is about 29†x36† and is made from using oil as a medium on a canvas. * This painting can be categorized as modern art. * Formal analysis * Within the composition of this painting, there is a peaceful village in the foreground and a dramatic night sky in our main viewpoint. There is a church steeple that dominates the village symbolizing unity in the town, and gives the impression of size and isolation.The left foreground has a curvy cypress tree which is usually associated with mourning. * There are many lines throughout this work of art. All of the swirling lines in the sky direct the viewer’s eyes around the painting. The fluid lines throughout the painting enhance the flow of Starry Night well. The curving lines create a sensation of depth in the painting. * The spacing between the s tars and the curving shapes create a dot-to-dot effect, ensuring fluidity. The contoured forms, shapes, and spirals in Starry Night were means of expression and used to convey emotion. The artist applied color in thick, broad, curved strokes to create texture. The texture of the bold brushstrokes, swirling circles, and swoops make the image seem to vibrate on the canvas. * The use of white and yellow colors creates a spiral effect and draws attention to the night sky. The dark blues and greens were complemented with touches of light pastel green showing the reflection of the moon. * The texture within this painting is visually meant to provide the viewer a sense of motion and vibrant light by exaggerating the twinkling of the stars out of realistic proportion.The curvy contoured forms in the sky give the illusion of the wind blowing as well as the curved vertical lines in the tree. * The colors within Starry Night are well balanced because they all flow together. The dominance of th e blue is balanced by the orange and yellow of the night sky elements. * When looking at this painting, the viewer would feel as if they were on top of a hill looking down on a village, making the night sky their direct view. This point of perspective is called linear perspective. * Van Gogh used a great deal of emphasis in the sky.By using bright and vivid colors and swirls around the stars, he exaggerated them making them stand out. * Starry Night has more unity than variety, because everything just flows in this painting and gives you a sense of balance and harmony. * Content Analysis * Starry Night is a painting of a dramatic night sky over a peaceful town. * During the later years of the 19th century, a group of postimpressionists came together to rebel against impressionism because they wanted art to have more focus on the traditional elements.Van Gogh’s painting was created in 1889, and fixated mostly on line and color with symbolism and emotion. * Starry Night was cre ated to be art. Van Gogh expressed himself through his paintings. He once explained in a letter to his brother Theo saying, â€Å"I paint as a means to make life bearable†¦ really we can only speak through our paintings†¦Ã¢â‚¬  * There are many interpretations of Starry Night, and one is that the canvas depicts hope. Van Gogh may have been showing that even with a dark night, it is still possible to see the light in the windows of the houses.Another insight may have been; with shining stars filling the sky, there is always light to guide you. The painting could have also shown the vast power of nature and mankind pointing to the heavens. * During this time period, many artists painted to express their emotions and symbolize what they thought or how they saw things. Postimpressionists thought that impressionist art was too vague, so they felt they need to focus their art on using more elements of art and color.

The Lost Thing Few Techniques

-The shape of the lost thing juxtaposes society in terms of colour and size. It is therefore ignored because of this fact (I found this post helpful http://community. boredofstudies. org/†¦ d. php? t=284556 , http://community. boredofstudies. org/†¦ d. php? t=205746) – Each individual is independent but together, they are seen as a group and belonging. which is ironic in a way? – When the lost thing was returned to the place, each of those characters was different and also the buildings inside were round compared to the human's ‘world'. There is also a sense of belonging but in what way?I can't seem to find the right word for it. – The protagonist is also seen as belonging when in the end, the frame zooms out showing that his tram is identical to the many others around it. IMG_20121113_185738. jpg – This picture shows how the society is identical and therefore they belong together IMG_20121113_185818 (1). jpg – This shows the duo goi ng against the crowd which shows not belonging and individualism. Also the crows is seen as belonging because they look the same and are walking towards the same direction IMG_20121113_185802 (1). pg So can anyone tell me if I am going on the right path in terms of finding the concepts of belonging in this text? and also what are the basis for concepts of belonging? Is it acceptance, understanding, relationships and identity? what else are there? Yes, you're on the right path, never read the picturebook but have seen the short film. The factors you have mentioned are important to belonging, but in respect to the Lost Thing I remember his isolation from family, also conformity is a big thing in it.In the picture book is there the scene where they go to the big dark place to find the lost thing's place? The tall, leering authoritarian figure is definitely something that stuck in my mind. I think the part at the end asserts that to have meaningful engagement of others, you have to have self acceptance and acceptance of others differences. It is exploring that to belong you don't have to be completely the same. The ones you have picked out are great, particularly the two protagonists visually going against the crowd.

Competition – What do we mean by the Global Market place?

1. What do we mean by the Global Market place? Global means to introduce the company world wide. To make the company known to the whole world rather than just one country. 2. What is globalisation? Globalisation refers to the way a company sets out to operate in exactly the same way throughout the globe using the same packaging, the same products, the same adverts, etc., in every country in which it operates. 3. What is internationalisation? This refers to the way in which companies expand their operations overseas in order to exploit new markets. 4. To be competitive an organisation needs to make sure that it: * Provide quality products that meet customer requirements. * Values its people- the most important resource of any organisation. * Uses modern technology, including information technology, to its full potential. * Ploughs back funds into new investment, research and product development. * Experiments with new ideas and sets out to lead rather than follow the field. * Makes sure that it has outstanding customer and community relationships as well as respecting the environment. * Takes into consideration the requirements of all its stakeholders.

Faith Essay Example | Topics and Well Written Essays - 500 words

Faith - Essay Example During that time, Christians who were caught and refused to commit fumie were imprisoned and subject a painful death known as â€Å"Anazuri† ( hung and bled to death over a pit ). It is through the harrowing experience of Rodriguez during his stay in Japan that he discovers the trials that his mentor has undergone. Unfortunately, even his own mentor was swallowed by pessimism. He was bitter in the end, swallowed by his own shame and guilt. In the end, he was betrayed by Kichiji-ro and Rodriguez commits the act of fumie. Being a historical fiction, the novel also relates the ties between Japan and the west because it recalls how the shoguns converted the people into Buddhism and launched a drive to expel missionaries. Apparently, the west had already begun its missions through St. Francis Xavier in 1549. The author always portrayed Rodriguez as Christ-like. His struggles of being the only Japanese in the university made him a reject, he was neither a Japanese nor French. He also contracted tuberculosis that resulted to one of his lungs removed that seemed to warn him how difficult it would be to pursue the search of his faith (Reinseima 2004 ) This was his main crisis in faith was only resolved when he met his former mentor in prison. Although it seems that every turn of his life was a block to his faith, it was only in the end that he recognized that these were not blocks at all. In fact, those struggles strengthened Rodriguez character and illuminated him in finding his faith . Moreover, his struggles like rejection, incarceration, persecution are the real mani- festations of having solid faith because despite the tribulations, Rodriguez searched for Christ. It was this unsettling silence of God that deeply troubled the main character Even at the beginning of the story, Rodriguez is already fascinated by the face of Christ. He would always wonder how Christ would look like in many situations such as kneeling in the Garden of Gethsemane. He